24/7 emergency service
(818) 805-2508

Review Us On

The Most Prevalent Heat Pump Problems and What You Should Do

A heat pump malfunction can be depressing, particularly if it is your only source of space heating and cooling. It’s critical to understand the most common causes of heat pump failure and how you can solve it yourself to save money in the long term. However, it is advised to contact specialists or a company that provides Heating Repair in Burbank in such cases.
The most common issues of heat pumps are listed below.

  1. The heat pump isn’t working properly
    A thermostat and power issue could be the cause of a heat pump problem. Check to see whether the thermostat needs to be adjusted or replaced if it is broken. If the pump is still not operating after an adjustment, the placement piece could be damaged, and you’ll need to find a replacement. Check that the heat pump is receiving sufficient power. You should also check whether the power socket has been switched on. Ascertain that the heat pump’s fuse hasn’t tripped or blown. Reset or replace the fuse if the problem is in the fuse. As a safety precaution, turn off the electricity first.

  2. In heat mode, the heat pump blows cold air
    If your heat pump is blowing cold air, make sure it is set to heat rather than cool. It may also be in defrost mode if the climate is cold. If this is the case, your system should revert to normal operation following the defrost procedure, which takes about 10-15 minutes.If your system continues to blow chilly air, look for a dirty air filter. The performance of your heat pump can be harmed by anything that restricts airflow. The most common cause is a dirty air filter, but additional causes include debris suffocating the outer unit or unclean coils that require professional cleaning. When none of these suggestions work, it’s time to call a business that provides heat pump repair in Calabasas to get a more detailed diagnosis of the problem.

  3. The blower of the heat pump fails to operate or freezes
    A damaged belt could be the cause of the blower not operating. Purchase a new belt to verify that the motor and pump blower is properly connected. A broken belt is next to impossible to repair, so you’re better off buying a new one. If the weather is too cold, it’s natural for your heat pump to freeze. Switch off the defrost cycle if it does not run on its own, allowing the condenser unit to defrost. Furthermore, make sure there are no blocked air vents and that the air filter is clean.

  4. Your heat pump is having trouble keeping your home warm
    Many of the issues that cause a system to blow cold air while in heat mode can create this predicament, such as a dirty home air filter, dirty ductwork, debris like weeds/grass impeding airflow around the outdoor unit, or dirty coils. 

We can assist you in getting a better deal for your heating repair in Burbank. To get the best  heat pump repair in Calabasas, call us at (818) 805-2508.